top of page
Linear Travertine LED Ceiling Light with Wood Base, Hallway Bar Light

Linear Travertine LED Ceiling Light with Wood Base, Hallway Bar Light

SKU: C-HDS-005
$0.00Price
A long square bar of travertine with a built-in LED strip along its underside, fixed to the ceiling on a short walnut or natural wood block. Lengths of 80, 100, 120 or 150cm, 5cm deep. Warm 3000K. Hallways, closets, kitchens, over a desk.
  • Material: Travertine + Wood + Acrylic

    Finish: Beige Travertine + Walnut or Natural Wood mount

    Dimensions: L 80 / 100 / 120 / 150cm × H 5cm

    Light Source: Integrated LED (built-in, non-replaceable)

    Bulb Included: Yes — integrated LED

    Max Wattage: Max 40W

    Color Temperature: 3000K warm white

    CRI: CRI > 80

    Input Voltage: AC 110-240V

    IP Rating: IP20 — indoor use only

    Control: Wall switch (on/off); non-dimmable integrated LED

    Dimmer Support: No — this model is supplied non-dimmable

    Mounting: Hardwire — ceiling-mounted to junction box

    Lamp Life: 50,000 hours

    Certification: CE, RoHS

    Packing: Foam + Carton

    Warranty: 2 Years

    Place of Origin: Guangdong, China

  • Q1: What does the wood block do?

    A1: It's the mount. The stone bar is fixed to the ceiling through a short wood block in the middle, which leaves a small shadow gap between the bar and the ceiling. It also hides the driver. You can pick walnut or a lighter natural wood.

     

    Q2: Which length works best?

    A2: 80cm and 100cm are the usual picks for hallways and walk-in closets. 120cm suits a kitchen run or a long corridor, and 150cm is for open-plan spaces or for lining up over a long island or table.

     

    Q3: Where does the light come out?

    A3: From a narrow opal strip along the bottom edge of the bar. It throws a long, even line of light straight down, which is why it works so well in narrow spaces where a round fixture would leave the ends dark.

     

    Q4: Can I dim it?

    A4: No. The LED driver is non-dimmable, so it simply turns on and off from your wall switch. Please don't wire it to a dimmer, as that can make the LED flicker or hum.

     

    Q5: How is it installed?

    A5: It's hardwired to one ceiling junction box at the centre, behind the wood block, so you only need a single power point however long the bar is. Have an electrician fit it. Indoor use only, IP20.

     

    Q6: Can I install several in a row?

    A6: Yes, and it looks good that way. Two or three bars of the same length running parallel down a corridor is a common layout. Each one needs its own junction box.

     

    Q7: Can I place orders directly on masolighting.com?

    A7: Website does not accept online orders. Shipping costs shown are estimates only. Contact sales for accurate pricing.

     

    Q8: How do I place an order?

    A8: Email info@masolighting.com | WhatsApp +86 13702469807 | Inquiry form | Online chat. International customers: email recommended for full quotation with specs + shipping.

Related Products

bottom of page