Modern Travertine Flush Mount Ceiling Light, Round LED Bedroom Light
A slim travertine ring frames an opal disc set slightly off centre, so one edge tucks under the stone and the other sits proud of it. Warm 3000K LED built in. Three sizes, Dia 40, 46 or 56cm, all only 5.5cm deep. Bedrooms, living rooms, halls.
Material: Travertine + Acrylic
Finish: Beige Travertine + Opal White Acrylic
Dimensions: Dia 40 / 46 / 56cm × H 5.5cm
Light Source: Integrated LED (built-in, non-replaceable)
Bulb Included: Yes — integrated LED
Max Wattage: Max 40W
Color Temperature: 3000K warm white
CRI: CRI > 80
Input Voltage: AC 110-240V
IP Rating: IP20 — indoor use only
Control: Wall switch (on/off); non-dimmable integrated LED
Dimmer Support: No — this model is supplied non-dimmable
Mounting: Hardwire — ceiling-mounted to junction box
Lamp Life: 50,000 hours
Certification: CE, RoHS
Packing: Foam + Carton
Warranty: 2 Years
Place of Origin: Guangdong, China
Q1: What makes this different from a plain round flush mount?
A1: The diffuser isn't centred. It sits a little to one side inside the travertine ring, so the stone shows as a thin band on one edge and a wider crescent on the other. It's a small shift, but it stops the light from looking like a standard builder-grade disc.
Q2: Which size should I pick?
A2: As a rough guide, Dia 40cm suits a room up to about 12 square metres, 46cm works for most double bedrooms, and 56cm is the one for a living room or a larger bedroom. All three are 5.5cm deep, so they work fine with low ceilings.
Q3: What kind of light does it give?
A3: Soft, even general light at 3000K warm white. The opal acrylic hides the LEDs completely, so there are no bright dots, and a little light spills onto the inner edge of the stone, which gives the ring a warm glow.
Q4: Can I dim it?
A4: No. The LED driver is non-dimmable, so it simply turns on and off from your wall switch. Please don't wire it to a dimmer, as that can make the LED flicker or hum.
Q5: How is it installed?
A5: It is hardwired to a standard ceiling junction box, so you will want an electrician to fit it. The wiring takes AC 110-240V, which covers both US and European mains. It is rated IP20, so keep it to dry indoor rooms.
Q6: How do I keep the stone clean?
A6: Switch it off at the breaker first, then wipe the stone with a dry or barely damp soft cloth. Skip bleach, solvents and scouring cream. The surface is sealed, but the open pores will hold onto anything harsh.
Q7: Can I place orders directly on masolighting.com?
A7: Website does not accept online orders. Shipping costs shown are estimates only. Contact sales for accurate pricing.
Q8: How do I place an order?
A8: Email info@masolighting.com | WhatsApp +86 13702469807 | Inquiry form | Online chat. International customers: email recommended for full quotation with specs + shipping.
