Alabaster Brim Disc Pendant – Brass Stem E27 Dia 14-16.5cm Globe Bulb
A narrow alabaster hub that steps outwards into a wide flat brim, carried on a slim brass rod with the bulb left showing beneath it. Dia 14-16.5cm, drop to 200cm. E26/E27, dimmable. Counter, bar, hallway.
Material: Alabaster + Brass
Finish: White Alabaster + Brushed Brass
Dimensions: Brim Dia 14 / 16.5cm | Max drop 200cm on the brass rod | Brass ceiling rosette | Exposed globe bulb below
Light Source: E26 / E27 screw base (bulbs not included)
Bulb Included: No
Max Wattage: Max 60W
Color Temperature: Bulb dependent; 2700-3000K warm white recommended
CRI: Bulb dependent
Input Voltage: AC 110-240V
IP Rating: IP20 — indoor use only
Dimmer Support: Yes — works with dimmable E26/E27 bulbs on a compatible wall dimmer
Lamp Life: Bulb dependent
Certification: CE, RoHS
Installation: Hardwire — ceiling-mounted to junction box
Packing: Foam + Carton
Warranty: 2 Years
Place of Origin: Guangdong, China
Q1: What is the shape of this pendant?
A1: A stepped profile: the alabaster starts as a narrow hub around the brass rod, then turns out sharply into a broad flat brim, so the silhouette reads like a low top hat seen from the side. The brim is the widest point and the underside is completely flat, which is what gives the piece its clean shadow line.
Q2: Which sizes are available?
A2: Two brim diameters, Dia 14cm and Dia 16.5cm, both White Alabaster with brushed brass and both supplied with rod for a drop of up to 200cm. The difference is subtle in isolation but obvious in a row — use the smaller over a narrow counter, the larger where the pendant hangs on its own.
Q3: The bulb is visible — is that intended?
A3: Yes. The brim shields the light from above and casts it down, while the lamp itself hangs clear below the stone as part of the composition. Fit a decorative globe LED, ideally an opal one, because on this design the bulb is seen from every angle and a bare filament stick will look unfinished.
Q4: What bulb and how bright?
A4: One E26/E27 screw base, bulbs not included, rated Max 60W. A 6-8W globe LED at 2700-3000K is the right pairing. Treat it as an accent or task light over a counter rather than the main source for a large room; in a hallway one unit is usually enough for the space.
Q5: Can it be dimmed?
A5: Yes — fit dimmable E26/E27 LED bulbs and pair them with a compatible wall dimmer. With the lamp on show, dimming matters more here than on an enclosed fitting, since a visible globe at full output is bright in the eyeline of anyone sitting at a counter or bar.
Q6: How is the drop set?
A6: A rigid brass rod runs from a brass ceiling rosette down to the pendant and is supplied for a drop of up to 200cm, shortened on site to suit the ceiling. Being a rod rather than a cord, it holds the brim dead level and stops the fitting swinging — worth having in a stairwell or a busy corridor.
Q7: Can I place orders directly on masolighting.com?
A7: Website does not accept online orders. Shipping costs shown are estimates only. Contact sales for accurate pricing.
Q8: How do I place an order?
A8: Email info@masolighting.com | WhatsApp +86 13702469807 | Inquiry form | Online chat. International customers: email recommended for full quotation with specs + shipping.
